Aerodyne Icon Full Rig Package: Complete Safety Guide

Confidence in the Sky Starts with Knowledge on the Ground

Your Aerodyne Icon Full Rig Package is crafted for performance—but its true power is unlocked when paired with safe, consistent usage. Whether you’re on your 25th jump or your 2,500th, safety must remain your highest priority. Therefore, understanding how to use, inspect, and maintain this gear is just as important as knowing how to fly.

---

📌 1. Pre-Jump Safety Essentials

✅ Perform a Thorough Gear Check—Every Time

Before heading to the loading area, you must inspect your gear thoroughly. While the Aerodyne Icon system is engineered for reliability, only routine checks will prevent avoidable issues during deployment.

🔍 Visual & Manual Pre-Jump Checklist:

• Reserve Pin Seated Securely

• Main Pin Properly Routed

• Bridle Fully Tucked with No Exposed Loops

• Riser Covers Sealed Magnetically

• Three-Ring System Aligned and Threaded Correctly

• Harness Buckles Firm and Facing Outward

• Chest Strap and Leg Straps Adjusted Snugly

• AAD (CYPRES, Vigil, or Mars) Powered On and Reading Altitude

🔑 Key Tip:

Use a buddy check system before boarding the aircraft. Two sets of eyes are better than one.

---

🛫 2. In-Plane Safety: Smart Preparation at Altitude

Once in the aircraft, your preparation continues. The calm before exit is your opportunity to ready both body and gear.

🧠 Mental & Physical Setup:

• Review Emergency Procedures: Know where your handles are. Visualize pulling your reserve and cutting away.

• Double-Check BOC Access: Confirm that nothing obstructs your pilot chute.

• Secure Loose Items: Gatorz, altimeters, cameras—all should be secure and snag-free.

🧩 Remember: Gear shifts during takeoff and climb. Take 30 seconds at 10,000 feet to re-tighten and re-check.

---

🚨 3. Emergency Procedures: Handle With Confidence

Emergencies may be rare—but being prepared ensures they don’t become disasters. Your Aerodyne Icon rig is built for fast, safe action. However, you must practice your muscle memory regularly.

🔗 Cutaway and Reserve Deployment Procedure:

1. Look: Identify both handles visually.

2. Peel & Pull Cutaway Handle (Right Side): Release main risers.

3. Reach & Pull Reserve Handle (Left Side): Initiate reserve deployment.

⚠️ When to Cut Away:

• Line Twists You Can’t Clear Below 2,000ft

• Tension Knots or Bag Lock

• Uncontrollable Spins

• Canopy Collapses or Off-Heading Landings Toward Hazards

🧠 Tip: Practice pull sequences on the ground monthly—even if you’re jumping regularly.

---

🪂 4. Under Canopy: Mid-Air Safety Protocols

Your main canopy choice (Pilot, Pilot7, or Zulu) affects how you fly, but canopy safety is universal. Once you’re under an open canopy, switch to defensive mode—observe, steer, and adapt.Aerodyne icon full rig package

🧭 In-Flight Safety Tactics:

• Clear Your Airspace Immediately After Opening

• Avoid Sudden Turns in Congested Areas

• Fly Predictable Patterns—Don’t Cut People Off

• Use Rear Risers for Subtle Glide Adjustments

• Flare at the Appropriate Altitude for Your Canopy Model

✅ Right of Way Rules:

• Lower Jumpers Always Have Priority

• Never Cross Another Canopy’s Line on Final Approach

🪖 Log each jump’s landing accuracy and note weather, traffic, and winds. Awareness fuels improvement.Aerodyne icon full rig package

---

🛬 5. Post-Landing Safety Practices

Landing doesn’t end the jump. After touchdown, your focus should shift to safe disengagement, canopy handling, and protecting your rig.

🚧 Ground Routine Essentials:

• Collapse the Canopy Quickly in Windy Conditions

• Stow Brakes and Lines Before Moving the Canopy

• Disconnect the RSL Only After Canopy Is Secure

• Check for Twisted Risers or Equipment Snags

• Never Drag the Container Across Rough Ground

🧼 Pro Tip: Wipe down your harness and leg pads if they get dusty or wet. It’ll prevent long-term wear.

---

🛠️ 6. Rig Maintenance: Safety Over the Long Run

Your Aerodyne Icon Full Rig Package is durable, but it requires thoughtful care to remain safe for hundreds of jumps.

🔧 Maintenance Timeline:

• Before Every Jump: Visual and tactile inspection

• After Every Day of Jumping: Full gear check with minor wipe-down

• Every 25 Jumps: Clean 3-ring system with silicone (lightly)

• Every 180 Days: Reserve repack by a certified rigger

• Every 1 Year: Full container and harness inspection

🔑 Must-Do Maintenance Habits:

• Store in a dry, dark location—UV damage is real.

• Keep Velcro clean to ensure secure riser stowage.

• Replace elastic keepers before they wear out.

• Don’t forget your AAD battery life—plan repacks around it.

---

⚙️ 7. Optional Safety Upgrades Worth Considering

While your Aerodyne Icon rig comes jump-ready, adding some small extras can elevate safety:

🔒 Smart Add-Ons:

• Hook Knife on Chest Strap: For emergency line entanglement

• Spacer Foam Padding: Enhances comfort, reduces strap slip

• Hard Handles Instead of Soft Loops: For easier emergency grabs

• Skyhook System (if using MARD): Speeds reserve deployment post-cutaway

🌟 Your drop zone rigger or instructor can guide you in installing and adjusting these upgrades properly.sky shop

---

💬 Quick Safety Reminders to Memorize

🚨 Always Remember:

• Never jump without a gear check—no matter your experience.

• Stay altitude-aware—from exit to deployment.

• Your first priority is survival, not saving the main.

• When in doubt—cut away and deploy the reserve.

• Don’t rush pack jobs—sloppy lines lead to scary openings.

---

🌍 Community & Safety Culture

Join a safety-minded culture. Discuss your jumps, film your landings, and share close calls—not to scare others, but to teach them. When safety becomes everyone’s responsibility, accidents become far less likely.sky shop

🤝 Great gear makes skydiving possible. Great awareness makes it sustainable.

---

🧭 Final Thought: Stay Sharp, Fly Smart, Land Safe

The Aerodyne Icon Full Rig Package empowers you to push boundaries—but only if you respect its design and prioritize safety on every single jump. With discipline, routine, and proper education, your rig won’t just be your gear—it’ll become your most trusted flight partner.

Mastering the Aerodyne Icon Full Rig Package

Get the Most Out of Every Jump with Skillful Use and Informed Practice

The Aerodyne Icon Full Rig Package delivers high performance, but the true potential lies in mastering its use. Whether you’re a recent A-license holder or a seasoned skydiver upgrading your gear, knowing how to handle, maintain, and adapt your rig is crucial. Below is a complete rundown on making the most of your full rig—safely, confidently, and effectively.

---

🎯 Before You Jump: Pre-Flight Preparation

Every great skydive starts on the ground. By developing a strong pre-flight routine, you prevent technical errors, build confidence, and ensure smooth deployments.

🛠️ Pre-Flight Mastery Tips:

• Visual Gear Check: Inspect stitching, reserve pin, bridle routing, and pilot chute placement.

• Harness Fit Adjustment: Tighten leg, chest, and lateral straps evenly—ensure a snug, not restrictive, fit.

• 3-Ring System Check: Confirm correct stow, routing, and ring alignment.

• AAD Activation: Turn on your Automatic Activation Device and verify it is reading correctly.

• Riser Magnet Check: Ensure both main risers are secured under the magnetic covers to reduce drag.

---

🚀 In the Aircraft: Managing the Ride Up

As altitude increases, tension builds. However, your rig must remain relaxed and aligned with your body. Use this time to check body positioning and ensure gear remains undisturbed.

👨‍✈️ Use-Time Insights:

• Secure the Chest Strap: Adjust the width to accommodate fall rate preferences and balance.

• Review Emergency Procedures: Mentally rehearse cutaway and reserve deployment scenarios.

• Protect Your BOC: Ensure no gear, handles, or accessories are obstructing your bottom-of-container pilot chute.

---

🌪️ Exit and Freefall: Efficiency Starts at Pull Time

The Aerodyne Icon container system is streamlined for reduced snag risk, but efficient movement is still critical. Your transition from exit to body flight must be stable and deliberate.

📏 Efficiency Checklist:

• Clean Exits: Keep limbs close during exit to prevent off-heading deployments.

• Deployment Positioning: Arch fully before reaching for your pilot chute to avoid line twists.

• Consistent Pull Altitude: Deploy at your planned altitude every time to reduce subterminal stress on the reserve system.skyshop

---

🪂 Canopy Flight: Precision Controls in the Air

Each canopy option in the package offers a different flight profile. Mastering the controls requires repetition, awareness, and consistent technique.skyshop

🧭 Flight Mastery Guide:

• Practice Flat Turns: Great for collision avoidance during canopy congestion.

• Use Rear Risers Smoothly: Maintain glide without destabilizing the canopy.

• Flare at the Right Time: Learn your canopy’s flare arc and avoid aggressive toggling too early.

💡 Tip: Log your landings and note the wind conditions, flare timing, and landing result. Over time, you’ll dial in a perfect approach pattern.

---

🪖 Aerodyne icon full rig package Post-Landing Habits: Resetting for Safety

Even after a clean landing, your gear deserves care and attention. Every rig check starts after the last jump, not before the next one.Aerodyne icon full rig package

🧼 Post-Jump Habits:

• Stow Lines Neatly: Reduce line wear by properly flaking and bagging the canopy.

• Inspect Your BOC Pouch: Look for stretching or fabric fatigue.

• Riser & Link Check: Ensure soft/hard links remain tight, with no slippage or fraying.

• Wipe Harness Clean: Especially in sandy, muddy, or humid drop zones.

---

🛡️ Training Tips for Accelerated Progress

📚 How to Level Up Faster

• Get a Canopy Course: A must-have. Even one course can improve safety, accuracy, and landings dramatically.

• Film Your Landings: Review footage with a coach to identify issues you may not feel in real time.

• Jump with Intention: Don’t just survive the skydive—train with a goal for every phase: exit, fall, canopy, and landing.

---

🧩 Aerodyne icon full rig package Advanced Handling for the Ambitious Flyer

Once you’ve nailed the basics, you can push the boundaries of your Aerodyne Icon Full Rig. Here’s how to explore its full potential without compromising safety.Aerodyne icon full rig package

🌀 Wingsuiting:

• Use the Pilot7 canopy for fast openings at sub-terminal speeds.

• Tighten leg straps to reduce riser spread and improve body alignment during openings.

🌪️ Freefly:

• Keep your harness adjusted for tight body fit to reduce movement during transitions.

• Confirm magnetic riser covers are always sealed before the jump.

🌈 Swooping:

• If using the Zulu main, focus on dialing in turn points and double-checking your recovery arc.

• Practice with rear risers before committing to toggle turns.

---

⚠️  Aerodyne icon full rig package Safety Is Skill-Dependent—Not Gear-Guaranteed

Even the most advanced full rig cannot compensate for poor habits or neglected maintenance. Your smart use, intentional practice, and situational awareness are essential. Every jump is a chance to perfect your discipline and deepen your understanding of your gear.Aerodyne icon full rig package

---

🔄 Aerodyne icon full rig package Routine Maintenance Tips

To master longevity as well as performance:

• Annual Rigger Inspection: Required for reserve repack and full system check.

• Replace Elastic Keepers: When worn or stretched.

• Rotate Pilot Chute: Periodically to prevent memory compression.

• Lubricate 3-Ring System: Light silicone once every 50–100 jumps.

---

🧠  Aerodyne icon full rig package Mastery Is a Process, Not an Achievement

With the Aerodyne Icon Full Rig Package, every jump is a training session, every flight an opportunity. From gearing up to touchdown, mastering your rig takes repetition, discipline, and the curiosity to improve.

🪂 Fly often. Land smart. Grow intentionally.

Let me know if you’d like this reformatted as a downloadable PDF or visual guide for students and customers!