Description

Used UPT Vector Micron V306 – Precision, Reliability, and Proven Performance

Confidence in freefall has been consistently supported by equipment that has been engineered with intention, and the Used UPT Vector Micron V306 has been recognized as one such solution. Designed for experienced jumpers who value precision, durability, and refined ergonomics, this container system has been relied upon worldwide for its balance of innovation and proven performance.

From the very first inspection, a clear emphasis on thoughtful construction has been observed. Moreover, long-term usability has been prioritized through design choices that continue to remain relevant across multiple generations of skydiving equipment. As a result, the Vector Micron series has continued to be selected by jumpers who seek both confidence and consistency in every phase of deployment.

---

Why the Used UPT Vector Micron V306 Continues to Be Chosen

Across drop zones globally, the Vector Micron platform has been trusted for its ability to deliver reliable outcomes while maintaining a compact and lightweight profile. In this specific configuration, performance expectations have been aligned with real-world use, ensuring that functionality has not been compromised by unnecessary complexity.

Additionally, cost efficiency has been supported through the used-equipment market, allowing premium engineering to be accessed without the premium price point of new manufacturing. Therefore, an optimal balance between value and quality has been achieved.

Key Value Drivers

• Proven Vector Micron design heritage

• Lightweight container profile for reduced bulk

• Compatibility with modern reserve canopies

• Streamlined configuration without Skyhook

• Maintained condition with documented history

Because these elements have been combined intentionally, this rig has been positioned as a compelling choice for jumpers who prioritize dependability over novelty.

---

Engineered by a Trusted Manufacturer

The Vector Micron V306 has been produced by United Parachute Technologies, a manufacturer that has long been associated with rigorous quality standards and continuous innovation. Through decades of refinement, systems have been developed to meet the demands of evolving skydiving disciplines while remaining grounded in safety-first engineering principles.

Consequently, every Vector Micron container has been built with structural integrity, clean reserve deployment paths, and ergonomic harness geometry in mind. These qualities have been preserved even as the system transitions into the secondary market.

---

Designed for Real-World Jumping Environments

Rather than being optimized solely for specifications on paper, the Vector Micron V306 has been shaped by practical use cases. Load distribution has been refined, bulk reduction has been emphasized, and component accessibility has been improved for riggers and jumpers alike.

Furthermore, operational familiarity has been encouraged by maintaining intuitive layouts and predictable deployment behavior. As a result, trust has been built not only during normal operations, but also during high-stress scenarios where consistency matters most.

Practical Advantages

• Reduced container bulk for comfort in freefall

• Familiar Vector deployment architecture

• Rigger-friendly access and layout

• Adaptability across common canopy pairings

Because of these factors, the learning curve has been minimized while long-term usability has been maximized.

---

A Configuration That Supports Informed Choice

This Used UPT Vector Micron V306 has been configured without a Skyhook system, allowing a traditional reserve deployment method to be maintained. For many jumpers, this approach has been intentionally preferred due to familiarity, training alignment, or personal philosophy regarding emergency procedures.

In addition, reserve compatibility has been ensured through the inclusion of a modern reserve canopy, allowing confidence to be supported by recent manufacturing standards rather than legacy materials.

Importantly, transparency has been prioritized. Manufacturing dates, usage history, and component details have been clearly documented so that informed decisions can be made without ambiguity.

---

Who This Rig Is Best Suited For

Rather than being positioned as a one-size-fits-all solution, this configuration has been best suited for jumpers who already understand their preferences and priorities. Experience levels that benefit most often include:

• Licensed jumpers seeking a compact Vector Micron setup

• Individuals upgrading from older container systems

• Buyers prioritizing value without sacrificing reliability

• Jumpers preferring non-Skyhook reserve systems

By aligning expectations upfront, satisfaction has been more consistently achieved after purchase.

---

A Smart Entry Point Into Premium Equipment

Access to premium equipment has often been limited by cost rather than capability. However, through this used Vector Micron V306, an opportunity has been created for jumpers to step into a high-end container system while remaining budget-conscious.

At the same time, compromises in safety or construction have not been required. Instead, longevity and performance have been preserved through careful ownership and responsible maintenance.

Technical Specifications – Used UPT Vector Micron V306

Technical clarity has been intentionally prioritized in this section so that informed purchasing decisions can be made with confidence. Rather than relying on assumptions, each specification has been documented to support transparency and trust throughout the evaluation process.

Container & Harness System Overview

This Used UPT Vector Micron V306 has been manufactured to deliver a compact yet capable container system that supports high-performance use while remaining approachable for experienced jumpers. Throughout its service life, structural integrity has been preserved through responsible use and consistent care.

Core Container Details

• Model: Vector Micron V306

• Manufacturer: United Parachute Technologies

• Date of Manufacture (DOM): April 2017

• Maximum Landing Weight (MLW): 18 + 2

• Skyhook System: Not installed

Because a streamlined configuration has been maintained, unnecessary bulk has been avoided. Consequently, improved comfort has been experienced both in freefall and under canopy. Additionally, the absence of a Skyhook system has allowed a traditional reserve deployment path to remain intact.

---

Reserve System Details – Included and Documented

A modern reserve system has been included with this setup, ensuring that safety expectations are supported by recent manufacturing standards rather than outdated materials. Moreover, reserve history has been clearly recorded so that condition assessments can be made without uncertainty.

Reserve Canopy Specifications

The reserve system has been equipped with a Performance Designs Reserve 113, a model that has been widely respected for predictable openings and dependable flight characteristics.

Reserve Canopy Information

• Reserve Model: PD Reserve 113

• Date of Manufacture (DOM): December 2022

• Total Repacks: 3

• Reserve Deployments (Rides): 1

Because the reserve canopy has been manufactured significantly later than the container, extended service life has been preserved. Furthermore, limited usage has contributed to confidence in fabric integrity and line condition.

---

Compatibility and System Balance

System compatibility has been carefully maintained across all included components. As a result, proper fit, reliable deployment, and balanced weight distribution have been supported throughout use.

Rather than combining mismatched or outdated elements, this configuration has been assembled to ensure that each part complements the overall system. Therefore, performance expectations have remained consistent during both routine jumps and emergency scenarios.

Compatibility Highlights

• Container size appropriately matched to reserve volume

• Modern reserve canopy paired with proven container platform

• Harness geometry aligned with Vector Micron standards

• Maintenance compatibility preserved for rigger servicing

Because compatibility issues have been avoided, long-term ownership concerns have been reduced.

---

Maintenance History and Transparency

Confidence in used equipment has often depended on clear documentation. For this reason, manufacturing dates, usage records, and repack counts have been made available to support full transparency.

Additionally, maintenance accessibility has been supported through the Vector Micron’s rigger-friendly design. As a result, inspections, repacks, and routine servicing have been simplified.

Condition Summary

• Normal wear consistent with responsible use

• No undocumented modifications reported

• Reserve repack history fully traceable

• Configuration maintained without experimental alterations

Because transparency has been emphasized, uncertainty has been minimized for prospective buyers.

---

Why These Specifications Matter to Buyers

Each specification listed above contributes directly to safety, usability, and long-term value. Rather than being presented as isolated numbers, these details work together to create a system that supports informed decision-making.

For jumpers evaluating used equipment, recent reserve manufacturing dates, documented usage, and proven container platforms are often considered essential. Consequently, this setup has been positioned as a practical and reassuring choice.

---

Real-World Performance Experience – Used UPT Vector Micron V306

Performance expectations have been shaped not only by specifications, but also by consistent real-world use. Throughout its operational life, the Used UPT Vector Micron V306 has been relied upon in active jump environments where predictability and control have been essential.

Rather than emphasizing experimental features, stability and familiarity have been preserved. As a result, confidence has been reinforced from exit to landing.

---

Freefall Stability and Container Profile

In freefall, body position and airflow management have been supported through the Micron’s reduced bulk and contoured container profile. Because excess material has been minimized, drag has been reduced and body alignment has been easier to maintain.

Furthermore, smooth airflow around the rig has contributed to consistent tracking and fall-rate control. Consequently, focus has been allowed to remain on the jump rather than on equipment interference.

Observed Freefall Benefits

• Reduced bulk behind the shoulders

• Improved body symmetry in neutral positions

• Less fabric distortion at higher airspeeds

• Predictable behavior during transitions

Because these characteristics have been present, performance consistency has been preserved across varied jump types.

---

Deployment Behavior and System Confidence

Deployment reliability has been one of the most defining strengths of the Vector Micron platform. In this configuration, deployment sequences have been supported by clean routing, stable bag extraction, and controlled canopy presentation.

Although individual results can vary, predictable behavior has been consistently associated with properly maintained Micron systems. Therefore, trust has been reinforced through repeated use.

Main and Reserve Deployment Considerations

Even without a Skyhook system, reserve deployment reliability has remained strong due to the Vector’s established reserve tray design. Because traditional deployment methods have been maintained, familiarity has been reinforced for jumpers trained on non-Skyhook systems.

Additionally, the included PD Reserve 113 has contributed to confidence through its reputation for dependable inflation and stable flight.

Deployment-Focused Advantages

• Clean reserve tray geometry

• Established Vector closing sequence

• Familiar emergency procedures

• Modern reserve canopy compatibility

Because complexity has been avoided, operational confidence has been strengthened.

---

Under-Canopy Comfort and Harness Ergonomics

Comfort under canopy has been supported through ergonomic harness design and even load distribution. Rather than creating pressure points, weight has been spread evenly across the jumper’s body.

Moreover, harness geometry has been refined to support long canopy rides without unnecessary strain. As a result, fatigue has been reduced and landing focus has been improved.

Ergonomic Highlights

• Balanced leg strap positioning

• Natural shoulder articulation

• Stable chest strap alignment

• Reduced pressure during opening shock

Because comfort has been addressed holistically, overall jump satisfaction has been enhanced.

---

Adaptability Across Jump Disciplines

While the Vector Micron V306 has not been marketed as discipline-specific, adaptability has been one of its defining traits. From belly flying to freeflying, stable behavior has been preserved across multiple use cases.

Additionally, the compact form factor has supported ease of movement during exits and transitions. Consequently, versatility has been maintained without sacrificing performance integrity.

Supported Use Scenarios

• Recreational freefall jumps

• Structured formation skydiving

• Freefly-oriented jump profiles

• General fun-jump environments

Because adaptability has been built into the platform, long-term usability has been extended.

---

Who Benefits Most From This Performance Profile

This performance configuration has been especially well-suited for jumpers who prioritize predictability over novelty. Rather than chasing the latest feature set, reliability and familiarity have been emphasized.

As a result, satisfaction has been more consistently reported among jumpers who value trust in their equipment.

Ideal Performance-Focused Buyers

• Experienced jumpers seeking consistency

• Individuals upgrading from bulkier rigs

• Jumpers preferring traditional reserve systems

• Buyers prioritizing confidence and control

Because expectations have been aligned realistically, post-purchase confidence has been reinforced.

---

Used UPT Vector Micron V306 Performance as a Long-Term Investment

Rather than being viewed as a temporary solution, this Used UPT Vector Micron V306 has been positioned as a long-term investment in dependable performance. Through careful configuration and documented history, longevity has been supported beyond its original production year.

Furthermore, compatibility with modern components has ensured continued relevance within current jumping environments.

Accessories & Included Components – Complete System Overview

Clarity around included components has been intentionally emphasized, ensuring that expectations are aligned before purchase decisions are made. Rather than leaving critical details implied, every major element included with this Used UPT Vector Micron V306 has been clearly outlined.Used UPT Vector Micron V306

Because transparency has been prioritized, confidence has been strengthened throughout the evaluation process.

---

Main Container & Harness Assembly (Included)

The foundation of this system has been formed by a UPT Vector Micron V306 container and harness assembly that has been responsibly maintained and configured for continued use.

Container & Harness Details

• Model: UPT Vector Micron V306

• Date of Manufacture (DOM): April 2017

• Maximum Landing Weight (MLW): 18 + 2

• Skyhook System: Not installed

As a result of this configuration, simplicity and familiarity have been preserved. Furthermore, servicing requirements have been kept straightforward, benefiting both owners and riggers.

---

Reserve System – Included and Documented

A critical safety component has been provided through the inclusion of a modern reserve canopy. Because reserve performance remains non-negotiable, emphasis has been placed on recent manufacturing and documented usage.

Reserve Canopy Specifications

• Model: Performance Designs Reserve 113

• Date of Manufacture (DOM): December 2022

• Total Repacks: 3

• Reserve Rides: 1

Because the reserve canopy has been manufactured significantly later than the container, long-term usability has been preserved. In addition, the limited repack and deployment history has contributed to buyer reassurance.

---

What Is Included – Quick Reference Checklist

To simplify review, all included components have been summarized below:

✔ UPT Vector Micron V306 container
✔ Harness system
✔ PD Reserve 113 canopy
✔ Modern reserve DOM (12/2022)
✔ Documented repack and ride history

Because nothing essential has been omitted, clarity has been reinforced.

---

Safety Considerations and Buyer Confidence

Safety has remained central to every design decision within the Vector Micron platform. Although this rig has been offered in used condition, structural integrity and component compatibility have been preserved through proper ownership and maintenance.

Additionally, the absence of undocumented modifications has helped ensure predictable system behavior.

Safety-Focused Attributes

• Proven Vector reserve tray architecture

• Modern reserve canopy materials

• Familiar emergency procedures

• Clear documentation and traceability

As a result, buyer confidence has been supported through transparency rather than assumption.

---

Inspection, Compliance, and Ownership Readiness

Before entering active service, used equipment is commonly subjected to inspection by a certified rigger. This system has been well-suited for such evaluation due to its accessible layout and standardized construction.

Because maintenance pathways remain unobstructed, compliance with local regulations has been easier to achieve.

Ownership Readiness Indicators

• Clear manufacturing dates provided

• Rigger-friendly construction

• No proprietary barriers to servicing

• Standardized Vector components

Therefore, transition into ownership has been simplified.

---

Why This Used UPT Vector Micron V306 Represents Strong Value

Rather than competing solely on price, this setup has been positioned as a value-driven investment. Premium design, recent reserve manufacturing, and documented history have been combined to create a compelling offering.

Consequently, access to high-end equipment has been made more attainable without sacrificing confidence or safety.Used UPT Vector Micron V306

---

Used UPT Vector Micron V306 Next Steps – Ready to Move Forward

When the right equipment is found, hesitation often creates unnecessary delay. For this reason, decisive next steps have been encouraged.

Whether questions remain or inspection arrangements are being considered, engagement has been welcomed.

Recommended Actions

• Request additional photos or documentation

• Arrange a rigger inspection

• Confirm sizing and compatibility

• Secure the rig before availability changes

Because quality used equipment moves quickly, timely decisions are often rewarded.