2009 Infinity I24 Skydiving Rig with Optimum 143 Reserve and Vigil 2

The 2009 Infinity I24 offers an excellent opportunity for a skydiver looking for a well-configured container system with a low overall jump count. This setup includes a 2008 Performance Designs Optimum 143 reserve and a 2011 Vigil 2 AAD, creating a practical package for someone who already has a suitable main canopy or wants to build a complete rig around a proven container.

With approximately 250 jumps or fewer on the gear, this system has seen relatively limited use. The previous owner has also been away from skydiving for approximately seven years, meaning the equipment has not accumulated the type of continuous jump numbers often found on rigs of a similar manufacture date.

Most importantly, the Infinity I24 provides useful flexibility when selecting a main canopy. The container can accommodate up to approximately a 170-size low-bulk main, depending on canopy design, packing characteristics, and manufacturer compatibility.

Key Features of the 2009 Infinity I24

This 2009 Infinity I24 skydiving rig combines practical sizing with a comfortable harness originally built around a jumper measuring approximately 6’0″ and 180 lbs.

Product Highlights

• Container: Infinity I24
• Container DOM: 2009
• Reserve: Performance Designs Optimum 143
• Reserve DOM: 2008
• AAD: Vigil 2
• AAD DOM: 2011
• Approximate jumps: 250 or fewer
• Main capacity: Up to approximately 170 low-bulk main
• Original harness fit: Approximately 6’0″ / 180 lbs
• Vigil battery service: Due approximately 2028
• Owner history: Previous owner has been out of the sport for around seven years
• Configuration: Ideal for completing with a compatible main canopy
• Use: Recreational skydiving and general sport jumping, subject to inspection and proper fitting

Infinity I24 Container

Infinity containers have long been used throughout recreational skydiving because of their practical harness-container design and straightforward configuration. This Infinity I24 was manufactured in 2009 and represents a versatile size for jumpers looking to pair the container with a moderate-size main canopy.

One of the major advantages of this particular I24 is its main-container capacity. A low-bulk main canopy of up to approximately 170 square feet may be accommodated, although final canopy compatibility should always be confirmed with the container manufacturer or a qualified rigger.

Different canopy models can pack at noticeably different volumes. Therefore, canopy size alone should never be used as the only compatibility measurement.

For jumpers downsizing gradually or moving between different low-pack-volume canopy designs, that flexibility can make the Infinity I24 particularly appealing.

Harness Built for Approximately 6’0″ and 180 lbs

Fit remains one of the most important considerations when purchasing used skydiving equipment. This 2009 Infinity I24 harness was originally built for a jumper approximately 6 feet tall and weighing around 180 pounds.

Those measurements provide a useful starting point for determining whether the harness may suit another jumper. However, height and weight do not tell the complete story.

Torso length, leg dimensions, body proportions, and harness geometry can significantly influence actual fit. Consequently, prospective owners should have the harness evaluated by an experienced rigger or qualified gear professional before jumping the system.

A properly fitted harness supports comfort while standing, climbing into the aircraft, moving around the cabin, exiting, flying under canopy, and landing.

2008 Performance Designs Optimum 143 Reserve

Included with the system is a 2008 Performance Designs Optimum 143 reserve canopy.

The Optimum series was developed as a low-pack-volume reserve design. As a result, an Optimum reserve can provide useful packing-volume advantages when compared with some conventional reserve designs of similar square footage.

The Optimum 143 makes this package particularly attractive for someone seeking a compact reserve configuration while maintaining 143 square feet of reserve canopy area.

Because reserve parachutes are life-saving equipment, the canopy’s manufacture date and description should always be considered alongside its actual inspection history.

Before returning the equipment to service, a certified rigger should inspect the reserve, verify its condition, confirm compatibility with the container, and repack it according to the requirements applicable in the jumper’s country.

2011 Vigil 2 AAD

A 2011 Vigil 2 automatic activation device is also included.

The Vigil 2 is designed to provide an additional safety layer by monitoring altitude and vertical speed. If activation parameters associated with the selected operational mode are reached, the AAD is designed to initiate reserve deployment by cutting the reserve closing loop.

According to the information supplied with this system, the Vigil is due for batteries in 2028.

Nevertheless, anyone purchasing the system should have the AAD’s serial information, maintenance status, battery status, service requirements, and current manufacturer guidance independently verified before use.

An AAD should complement good training and emergency procedures rather than replace them.

Low Jump Count for the Gear

Another attractive characteristic of this 2009 Infinity I24 package is its relatively low reported usage.

The gear has accumulated approximately 250 jumps or fewer.

Jump count can provide useful information when evaluating pre-owned skydiving equipment because repeated use can gradually affect webbing, hardware, closing components, riser areas, deployment components, and fabric.

However, age and storage conditions are equally important. Since the previous owner has reportedly been out of the sport for around seven years, a full inspection should be completed before the system is placed back into service.

Equipment Included

The package features the major components required to create the foundation of a personal skydiving system:

• 2009 Infinity I24 harness/container
• 2008 Performance Designs Optimum 143 reserve
• 2011 Vigil 2 AAD

A compatible main canopy can then be selected according to the jumper’s experience, wing loading, training, and the container’s approved packing range.

Main Canopy Capacity

The Infinity I24 can accommodate up to approximately a 170 low-bulk main canopy based on the information available for this particular setup.

That capacity can provide useful options for jumpers who prefer larger recreational mains while still wanting a relatively streamlined container.

However, not every 170 canopy packs to the same volume. Fabric type, line type, canopy construction, age, and design can all affect packed volume.

Therefore, a 170 ZP canopy should not automatically be assumed to fit simply because a 170 low-bulk canopy can fit.

A qualified rigger should confirm the intended main canopy before installation.

A Strong Foundation for a Personal Skydiving Setup

For a jumper looking to assemble a personal rig, this 2009 Infinity I24 with Optimum 143 and Vigil 2 offers a practical starting point.

Rather than purchasing every major component separately, the buyer receives an Infinity harness/container, Performance Designs reserve, and Vigil AAD together.

The reported jump count of 250 or fewer adds further appeal for buyers who value equipment that has not accumulated extremely high usage.

Furthermore, the harness dimensions may work particularly well for jumpers whose build is reasonably close to the original 6’0″, 180-lb configuration, subject to professional fitting.

Why Consider This 2009 Infinity I24?

A used skydiving system can offer excellent value when its sizing, component compatibility, maintenance history, and physical condition meet the buyer’s requirements.

This package provides several useful advantages. The Infinity I24 offers flexible main-canopy capacity, while the Optimum 143 provides a respected low-volume reserve configuration. Meanwhile, the included Vigil 2 adds an AAD to the system rather than requiring the buyer to source one separately.

Additionally, its relatively low reported jump count makes the package worth considering for someone building a recreational skydiving setup.

Before jumping any pre-owned parachute system, however, every component should receive the appropriate professional inspection.

Ready for Inspection and Setup

The 2009 Infinity I24, 2008 Optimum 143, and 2011 Vigil 2 combination provides a versatile foundation for an experienced jumper or someone purchasing personal equipment with guidance from an instructor or rigger.

With capacity for approximately a 170 low-bulk main, a harness originally designed around a 6’0″, 180-lb jumper, and reported usage of 250 jumps or fewer, the package offers an appealing balance of size, equipment configuration, and versatility.

The next owner can select a compatible main canopy based on experience level and intended wing loading before having the complete system professionally assembled, inspected, and approved for use.

For anyone searching for a used Infinity I24 skydiving rig, an Infinity container with Optimum 143 reserve, or a Vigil 2-equipped parachute system, this setup deserves consideration as a practical base for a complete personal rig.

Always have used skydiving equipment inspected, fitted, assembled, and packed by an appropriately qualified parachute rigger before use.